Jack Pipes Industries
Jack Pipes Industries
New Delhi, Delhi
GST No. 07BMXPA5960M1ZC
TrustSEAL Verified
Call 0804855232374% Response Rate
SEND EMAIL

Hdpe Pipe

Our product range includes a wide range of 40/33 mm hdpe plb duct pipe, hdpe sewage pipes, hdpe coil pipes, jack pipe 3 inch hdpe pipes, 3 m, jack pipe 1 inch hdpe pipes, 3 m and plb hdpe telecom duct pipes.

40/33 Mm HDPE PLB Duct Pipe

40/33 Mm HDPE PLB Duct Pipe
  • 40/33 Mm HDPE PLB Duct Pipe
Get Best Quote
Approx. Price: Rs 38 / MeterGet Latest Price

Product Details:

Minimum Order Quantity20000 Meter
Size1
Thickness20mm OD TO 1000mm OD
ColorOrange, Green, Red, Blue, Black or as per Customers requirements.
Connection End TypeMale
Flow Rate2 (Litre Per Hour)
I deal inNew Only
MaterialHDPE

We are the Manufacturer, Distributor and Supplier of the best quality range of 40/33 mm PLB Duct Pipes. These products are available at an affordable and Best price.

 

 

Range: Size- 25/26 mm, 32/26 mm, 40/33 mm, 50/42 mm, 110 mm Etc

 


'Jack Pipe Inductries' was one of the first very few manufacturers to acquire technology and equipment for establishing complete manufacturing facility for PLB-HDPE Telecom Ducts.

At 'Jack Pipes', PLB-HDPE Telecom Ducts are manufactured using ultra-violet (UV) stabilized grade of HDPE with required Anti Oxidant content and other recommended additives. The inner layer of ducts is duly silicon coated which minimizes the friction between OFC and the duct during the process of blowing the cable into the ducts, thus providing smooth installation of OFC in the duct without damaging the cable fibres.

 

 

Specification:

Size Range: 32/26 mm, 40/33 mm, 50/42 mm

Color: Orange, Green, Brown, Blue, Black or as per Customers requirements.

Available in Coils upto 1000 Meters Length.

Available as per TEC Specifications or Customers requirements, RDSO Specification and ISI 4984:2016


HDPE PLB Duct are designed and engineered to house the sensitive nerves of Information technology i.e. optical fibers thus enabling information transfer across the globe. Available as per Indian, International Standards or Customers requirements Most Suited for Pulling Optical Fibre Cable (OFC), Telecom, Electrical Lines etc.

 

Features:

  • Environment Stress Crack Resistance (ESCR)

  • Impact Resistance

  • Crush Resistance

  • Low Coefficient of Friction

  • Temperature Resistance

  • Ultraviolet (UV) protection

 

Material : Permanently lubricated HPDE Telecom Ducts are manufactured with the superior grade of High-Density Polyethylene materials. HDPE pipes manufactured meets all the requirements of TEC Specifications as well as IS 4984-1995.

Lubrication : Permanently lubricated HDPE Telecom Ducts have special lubricated compound on Inner Side for Conveying Optical Fiber cables with extremely low friction. Coefficient of Friction between the inside of the HDPE Duct and the outside of the inserted communication cable does not exceed 0.06. Properties of Lubricant are Its strongly locked into HDPE. It has same physical/mechanical properties as HDPE except low Coefficient of Friction value which is less than 0.06. Its evenly distributed around the bore and along the length of duct. Does not react with water, hence it is possible to clean the duct by water stream in case of any obstruction/accident. Have same frictional properties during life of the duct.

 

Product Applications:

HDPE Ducts are suitable for installation in the field dirt trenches, under sidewalks, roads, within communication networks, between communication centers and between cities. They can also be used in branch networks between cells, distribution cabinets, poles, in walls and within subterranean networks of homes, allowing the insertion of optical or copper communication cables, as well as TV/cable aluminium co-axial cables. Cables can be inserted in through the pipe by blowing, with an internal air-pressure up to eight bars.

Request
Callback
Yes! I am Interested

HDPE Sewage Pipes

HDPE Sewage Pipes
  • HDPE Sewage Pipes
Get Best Quote
Approx. Price: Rs 100 / MeterGet Latest Price

Product Details:

Material GradePE 63,PE 80 & PE 100
Usage/ApplicationDrinking Water
Thickness20 mm OD to 500 mm OD
ColorBlack
Pressure2.5 Kg./cm2 to 16 Kg./cm2
I deal inNew Only

We are the Manufacturer, Distributor and Supplier of the best quality range of HDPE Sewage Pipe. These products are available at an affordable and Best price

 

 

Range: Size- From 110 mm to 315 mm (Nominal Outside Dia.)

Variety - PN 2.5, PN 4, PN 6, PN 8, PN 10, PN 12.5 & PN 16.

 

 

JACK PIPES pipes are manufactured in according to various Indian & International standards such as IS 14333. These are manufactured using advanced machinery & high-quality Raw materials from certified Vendors to manufacture the pipes which comply with international quality standards. With an installed production capacity of 10000 Kg Per Day for HDPE Pipes, we are committed to just in time supplying high-quality products to our customers.

 

 

 

Features and Specifications:

Manufactured from virgin pipe grade raw materials (PE 63, PE80, PE 100).

Excellent corrosion and chemical resistance. Inert to most acidic and

alkaline solutions.

High flow characteristics.

Light in Weight.

Easy to handle & transport.

Excellent flexibility combined with strength

Good abrasion resistance.

Smooth inner walls minimises frictional losses.

Safe for potable water supply.

 

 

Applications:

Process Water

Waste Water

Treated Water

Irrigation Sewer

Slurry Lines

Chemical Applications

Paper Mills

Sugar Mills

Breweries

Distilleries

Residential Colonies

Housing Societies

Farm Houses

Jal Boards Corporations

E.T.P.

W.T.P.

 

 

Other Details:

Brand:- Jack Pipes

Country of Origin:- Delhi, India

Material:- HDPE PE-100 / PE-80 / PE-63

Size & Pressure Rating:- 20 mm to 125 mm OD, 2.5 Kg/cm² to 16 Kg/cm²

Standards:- IS:4984, 14333,14151, DIN:8074/8075, ISO:4427

Request
Callback
Yes! I am Interested

HDPE Coil Pipes

HDPE Coil Pipes
  • HDPE Coil Pipes
Get Best Quote
Approx. Price: Rs 60 / MeterGet Latest Price

Product Details:

Minimum Order Quantity5000 Meter
ColorBlack
Working Life50 Years for Water Application
Normal Working Temperature Range-40 degreeC. to 80 degreeC
Pressure Rating2.5 kg/ square cm to 16 kg/ square cm
Raw Material GradePE 63,PE 80,PE 100
Size RangeFrom 20 mm O.D. to 1000 mm O.D

We are the Manufacturer, Distributor and Supplier of the best quality range of HDPE Coil Pipe. These products are available at an affordable and Best price.


JACK PIPES HDPE Water Coil Pipes are highly preferred over metallic pipes for water transportations due to their corrosion resistance feature resulting in longer life span.These pipes are manufactured in according to various Indian & International standards such as IS 4984:1995, 4984:2016, IS 14333:1996, ISO 4427. Leveraging on the vast experience of 27 years, we have emerged as a one stop solution for HDPE pipes, PVC Pipes & Irrigation systems. These are manufactured using advanced machinery & high-quality Raw materials from certified Vendors to manufacture the pipes which comply with international quality standards. With an installed production capacity of 10000 Kg Per Day for HDPE Pipes, we are committed to just in time supplying high-quality products to our customers.

 

Applications:

 

  • Lift and gravity water supply systems

  • Sewerage and Drainage systems

  • Industrial effluent disposal systems

  • Cable Ducting

  • Portable water supply

  • Irrigation/ Agriculture

  • Sprinkler System

  • Gas Distribution

 

 

Advantages:

 

  • High Tensile Strength & High-Stress Crack Resistance prevents inching growth of cracks.

  • High resistance to UV & direct sunlight

  • Leak proof joints.

  • Light weight and flexible.

  • Easy to install and transport

  • Excellent flow characteristics due to smooth inner surface hence low frictional loss

  • Weather Resistant

  • Excellent corrosion, abrasion and chemical resistance. Inert to most acidic and alkaline solutions

  • HDPE pipes have good ductility and toughness

  • Available in straight length of 5m, 6m, 12m, and coil.

 

 

Specifications:

Brand:- Jack Pipes

Country of Origin:- Delhi, India

Material:- HDPE PE-100 / PE-80 / PE-63

Size & Pressure Rating:- 20 mm to 125 mm OD, 2.5 Kg/cm² to 16 Kg/cm²

Standards:- IS:4984, 14333,14151, DIN:8074/8075, ISO:4427

Request
Callback
Yes! I am Interested

Jack Pipe 3 inch HDPE Pipes, 3 m

Jack Pipe 3 inch HDPE Pipes, 3 m
  • Jack Pipe 3 inch HDPE Pipes, 3 m
  • Jack Pipe 3 inch HDPE Pipes, 3 m
Get Best Quote
Approx. Price: Rs 103 / MeterGet Latest Price

Product Details:

BrandJack Pipe
Size/Diameter3 inch
Length of Pipe3 m
Pressure RatingPN 6
Material GradePE 63
ColorBlack
Pipe Joint typeSol fit
TypeHard Tube
MaterialHDPE
Pipe ClassSchedule 80
Usage/ApplicationDrinking Water
ShapeRound
Country of OriginMade in India
Working Temperature Range-40 degreeC to 80 degreeC
Working Life50 Years for Water Application

We are the Manufacturer, Distributor and Supplier of the best quality range of 160 mm OD HDPE Pipes. These products are available at an affordable and Best price. 

 

Use For:- Power Cables, Conduit Cable, TPDDL, Power Plant, Water Pipe, Drainage, Sewage

 

Range: Size- From 20 mm to 315 mm (Nominal Outside Dia.)

Variety - PN 2.5, PN 4, PN 6, PN 8, PN 10, PN 12.5 & PN 16.

 

 

JACK PIPES pipes are manufactured in according to various Indian & International standards such as IS 4984:1995, 4984:2016, ISO 4427, IS 14333, 14151. These are manufactured using advanced machinery & high-quality Raw materials from certified Vendors to manufacture the pipes which comply with international quality standards. With an installed production capacity of 10000 Kg Per Day for HDPE Pipes, we are committed to just in time supplying high-quality products to our customers.

 

 

 

Features and Specifications:

Manufactured from virgin pipe grade raw materials (PE 63, PE80, PE 100).

Excellent corrosion and chemical resistance. Inert to most acidic and

alkaline solutions.

High flow characteristics.

Light in Weight.

Easy to handle & transport.

Excellent flexibility combined with strength

Good abrasion resistance.

Smooth inner walls minimises frictional losses.

Safe for potable water supply.

 

 

Applications:

Process Water

Waste Water

Treated Water

Irrigation Sewer

Slurry Lines

Chemical Applications

Paper Mills

Sugar Mills

Breweries

Distilleries

Residential Colonies

Housing Societies

Farm Houses

Jal Boards Corporations

E.T.P.

W.T.P.

 

 

Other Details:

Brand:- Jack Pipes

Country of Origin:- Delhi, India

Material:- HDPE PE-100 / PE-80 / PE-63

Size & Pressure Rating:- 20 mm to 125 mm OD, 2.5 Kg/cm² to 16 Kg/cm²

Standards:- IS:4984, 14333,14151, DIN:8074/8075, ISO:4427

Request
Callback
Yes! I am Interested

Jack Pipe 1 inch HDPE PIPES, 3 m

Jack Pipe 1 inch HDPE PIPES, 3 m
  • Jack Pipe 1 inch HDPE PIPES, 3 m
Get Best Quote
Approx. Price: Rs 100 / MeterGet Latest Price

Product Details:

Size/Diameter1 inch
Length of Pipe3 m
Pressure Rating/ PN ClassPN 6
Usage/ApplicationAgriculture
ColorBlack
Flow Rate2 (Litre Per Hour)
I Deal InNew Only
BrandJack Pipe
Country of OriginMade in India
MaterialHDPE
Hollow SectionsSquare

We are the Manufacturer, Distributor and Supplier of the best quality range of HDPE Length Pipe. These products are available at an affordable and Best price.


JACK PIPES HDPE Water Length Pipes are highly preferred over metallic pipes for water transportations due to their corrosion resistance feature resulting in longer life span.These pipes are manufactured in according to various Indian & International standards such as IS 4984:1995, 4984:2016, IS 14333:1996, ISO 4427. Leveraging on the vast experience of 27 years, we have emerged as a one stop solution for HDPE pipes, PVC Pipes & Irrigation systems. These are manufactured using advanced machinery & high-quality Raw materials from certified Vendors to manufacture the pipes which comply with international quality standards. With an installed production capacity of 10000 Kg Per Day for HDPE Pipes, we are committed to just in time supplying high-quality products to our customers.

???

Applications:

???

  • Lift and gravity water supply systems

  • Sewerage and Drainage systems

  • Industrial effluent disposal systems

  • Cable Ducting

  • Portable water supply

  • Irrigation/ Agriculture

  • Sprinkler System

  • Gas Distribution

???

???

Advantages:

???

  • High Tensile Strength & High-Stress Crack Resistance prevents inching growth of cracks.

  • High resistance to UV & direct sunlight

  • Leak proof joints.

  • Light weight and flexible.

  • Easy to install and transport

  • Excellent flow characteristics due to smooth inner surface hence low frictional loss

  • Weather Resistant

  • Excellent corrosion, abrasion and chemical resistance. Inert to most acidic and alkaline solutions

  • HDPE pipes have good ductility and toughness

  • Available in straight length of 5m, 6m, 12m, and coil.

???

???

Specifications:

Brand:- Jack Pipes

Country of Origin:- Delhi, India

Material:- HDPE PE-100 / PE-80 / PE-63

Size & Pressure Rating:- 20 mm to 125 mm OD, 2.5 Kg/cm² to 16 Kg/cm²

Standards:- IS:4984, 14333,14151, DIN:8074/8075, ISO:4427

Request
Callback
Yes! I am Interested

PLB HDPE Telecom Duct Pipes

PLB HDPE Telecom Duct Pipes
  • PLB HDPE Telecom Duct Pipes
Get Best Quote
Approx. Price: Rs 43 / MeterGet Latest Price

Product Details:

Single Piece Length3 meter, 36 meter
Usage/ApplicationIndustrial
I deal inNew Only
ApplicationDrinking Water
Size/Diameter1/2 inch, 3 inch
MaterialHDPE

We are the Manufacturer, Distributor and Supplier of the best quality range of PLB HDPE Telecom Duct Pipes. These products are available at an affordable and Best price.

 

 

Range: Size- 25/26 mm, 32/26 mm, 40/33 mm, 50/42 mm, 110 mm Etc

 


'Jack Pipe Inductries' was one of the first very few manufacturers to acquire technology and equipment for establishing complete manufacturing facility for PLB-HDPE Telecom Ducts.

At 'Jack Pipes', PLB-HDPE Telecom Ducts are manufactured using ultra-violet (UV) stabilized grade of HDPE with required Anti Oxidant content and other recommended additives. The inner layer of ducts is duly silicon coated which minimizes the friction between OFC and the duct during the process of blowing the cable into the ducts, thus providing smooth installation of OFC in the duct without damaging the cable fibres.

 

 

Specification:

Size Range: 32/26 mm, 40/33 mm, 50/42 mm

Color: Orange, Green, Brown, Blue, Black or as per Customers requirements.

Available in Coils upto 1000 Meters Length.

Available as per TEC Specifications or Customers requirements, RDSO Specification and ISI 4984:2016


HDPE PLB Duct are designed and engineered to house the sensitive nerves of Information technology i.e. optical fibers thus enabling information transfer across the globe. Available as per Indian, International Standards or Customers requirements Most Suited for Pulling Optical Fibre Cable (OFC), Telecom, Electrical Lines etc.

 

Features:

  • Environment Stress Crack Resistance (ESCR)

  • Impact Resistance

  • Crush Resistance

  • Low Coefficient of Friction

  • Temperature Resistance

  • Ultraviolet (UV) protection

 

Material : Permanently lubricated HPDE Telecom Ducts are manufactured with the superior grade of High-Density Polyethylene materials. HDPE pipes manufactured meets all the requirements of TEC Specifications as well as IS 4984-1995.

Lubrication : Permanently lubricated HDPE Telecom Ducts have special lubricated compound on Inner Side for Conveying Optical Fiber cables with extremely low friction. Coefficient of Friction between the inside of the HDPE Duct and the outside of the inserted communication cable does not exceed 0.06. Properties of Lubricant are Its strongly locked into HDPE. It has same physical/mechanical properties as HDPE except low Coefficient of Friction value which is less than 0.06. Its evenly distributed around the bore and along the length of duct. Does not react with water, hence it is possible to clean the duct by water stream in case of any obstruction/accident. Have same frictional properties during life of the duct.

 

Product Applications:

HDPE Ducts are suitable for installation in the field dirt trenches, under sidewalks, roads, within communication networks, between communication centers and between cities. They can also be used in branch networks between cells, distribution cabinets, poles, in walls and within subterranean networks of homes, allowing the insertion of optical or copper communication cables, as well as TV/cable aluminium co-axial cables. Cables can be inserted in through the pipe by blowing, with an internal air-pressure up to eight bars.

Request
Callback
Yes! I am Interested

110 Mm & 125 Mm HDPE Pipes

110 Mm & 125 Mm HDPE Pipes
  • 110 Mm & 125 Mm HDPE Pipes
Get Best Quote
Approx. Price: Rs 105 / MeterGet Latest Price

Product Details:

Minimum Order Quantity1000 Meter
Pressure Rating6kg/cm
ColorBlack
Unit Length6m, 12m
Thickness110mm
Usage/ApplicationDrinking Water
I deal inNew Only
Working Temperature Range-40 degreeC to 80 degreeC

We are the Manufacturer, Distributor and Supplier of the best quality range of 110 mm / 125 mm HDPE Pipes. These products are available at an affordable and Best price. 

 

Use For:- Power Cables, TPDDL, Power Plant, Water Pipe, Drainage, Sewage

 

 

Range: Size- From 20 mm to 315 mm (Nominal Outside Dia.)

Variety - PN 2.5, PN 4, PN 6, PN 8, PN 10, PN 12.5 & PN 16.

 

 

JACK PIPES pipes are manufactured in according to various Indian & International standards such as IS 4984:1995, 4984:2016, ISO 4427, IS 14333, 14151. These are manufactured using advanced machinery & high-quality Raw materials from certified Vendors to manufacture the pipes which comply with international quality standards. With an installed production capacity of 10000 Kg Per Day for HDPE Pipes, we are committed to just in time supplying high-quality products to our customers.

 

 

 

Features and Specifications:

Manufactured from virgin pipe grade raw materials (PE 63, PE80, PE 100).

Excellent corrosion and chemical resistance. Inert to most acidic and

alkaline solutions.

High flow characteristics.

Light in Weight.

Easy to handle & transport.

Excellent flexibility combined with strength

Good abrasion resistance.

Smooth inner walls minimises frictional losses.

Safe for potable water supply.

 

 

Applications:

Process Water

Waste Water

Treated Water

Irrigation Sewer

Slurry Lines

Chemical Applications

Paper Mills

Sugar Mills

Breweries

Distilleries

Residential Colonies

Housing Societies

Farm Houses

Jal Boards Corporations

E.T.P.

W.T.P.

 

 

Other Details:

Brand:- Jack Pipes

Country of Origin:- Delhi, India

Material:- HDPE PE-100 / PE-80 / PE-63

Size & Pressure Rating:- 20 mm to 125 mm OD, 2.5 Kg/cm² to 16 Kg/cm²

Standards:- IS:4984, 14333,14151, DIN:8074/8075, ISO:4427


Request
Callback
Yes! I am Interested

50/42 Mm HDPE PLB Duct Pipe

50/42 Mm HDPE PLB Duct Pipe
  • 50/42 Mm HDPE PLB Duct Pipe
Get Best Quote
Approx. Price: Rs 50 / MeterGet Latest Price

We are the Manufacturer, Distributor and Supplier of the best quality range of 50/42 mm PLB Duct Pipes. These products are available at an affordable and Best price.

 

 

Range: Size- 25/26 mm, 32/26 mm, 40/33 mm, 50/42 mm, 110 mm Etc

 


'Jack Pipe Inductries' was one of the first very few manufacturers to acquire technology and equipment for establishing complete manufacturing facility for PLB-HDPE Telecom Ducts.

At 'Jack Pipes', PLB-HDPE Telecom Ducts are manufactured using ultra-violet (UV) stabilized grade of HDPE with required Anti Oxidant content and other recommended additives. The inner layer of ducts is duly silicon coated which minimizes the friction between OFC and the duct during the process of blowing the cable into the ducts, thus providing smooth installation of OFC in the duct without damaging the cable fibres.

 

 

Specification:

Size Range: 32/26 mm, 40/33 mm, 50/42 mm

Color: Orange, Green, Brown, Blue, Black or as per Customers requirements.

Available in Coils upto 1000 Meters Length.

Available as per TEC Specifications or Customers requirements, RDSO Specification and ISI 4984:2016


HDPE PLB Duct are designed and engineered to house the sensitive nerves of Information technology i.e. optical fibers thus enabling information transfer across the globe. Available as per Indian, International Standards or Customers requirements Most Suited for Pulling Optical Fibre Cable (OFC), Telecom, Electrical Lines etc.

 

Features:

  • Environment Stress Crack Resistance (ESCR)

  • Impact Resistance

  • Crush Resistance

  • Low Coefficient of Friction

  • Temperature Resistance

  • Ultraviolet (UV) protection

 

Material : Permanently lubricated HPDE Telecom Ducts are manufactured with the superior grade of High-Density Polyethylene materials. HDPE pipes manufactured meets all the requirements of TEC Specifications as well as IS 4984-1995.

Lubrication : Permanently lubricated HDPE Telecom Ducts have special lubricated compound on Inner Side for Conveying Optical Fiber cables with extremely low friction. Coefficient of Friction between the inside of the HDPE Duct and the outside of the inserted communication cable does not exceed 0.06. Properties of Lubricant are Its strongly locked into HDPE. It has same physical/mechanical properties as HDPE except low Coefficient of Friction value which is less than 0.06. Its evenly distributed around the bore and along the length of duct. Does not react with water, hence it is possible to clean the duct by water stream in case of any obstruction/accident. Have same frictional properties during life of the duct.

 

Product Applications:

HDPE Ducts are suitable for installation in the field dirt trenches, under sidewalks, roads, within communication networks, between communication centers and between cities. They can also be used in branch networks between cells, distribution cabinets, poles, in walls and within subterranean networks of homes, allowing the insertion of optical or copper communication cables, as well as TV/cable aluminium co-axial cables. Cables can be inserted in through the pipe by blowing, with an internal air-pressure up to eight bars.

Request
Callback
Yes! I am Interested

Pre-Lubricated PLB Duct Pipes

Pre-Lubricated PLB Duct Pipes
  • Pre-Lubricated PLB Duct Pipes
Get Best Quote
Approx. Price: Rs 40 / MeterGet Latest Price
About PLB-HDPE Telecom Ducts

 

We are the Manufacturer, Distributor and Supplier of the best quality range of PRE-LUBRICATED Duct Pipes. These products are available at an affordable and Best price.

 

 

Range: Size- 25/26 mm, 32/26 mm, 40/33 mm, 50/42 mm, 110 mm Etc

 


'Jack Pipe Inductries' was one of the first very few manufacturers to acquire technology and equipment for establishing complete manufacturing facility for PLB-HDPE Telecom Ducts.

At 'Jack Pipes', PLB-HDPE Telecom Ducts are manufactured using ultra-violet (UV) stabilized grade of HDPE with required Anti Oxidant content and other recommended additives. The inner layer of ducts is duly silicon coated which minimizes the friction between OFC and the duct during the process of blowing the cable into the ducts, thus providing smooth installation of OFC in the duct without damaging the cable fibres.

 

 

Specification:

Size Range: 32/26 mm, 40/33 mm, 50/42 mm

Color: Orange, Green, Brown, Blue, Black or as per Customers requirements.

Available in Coils upto 1000 Meters Length.

Available as per TEC Specifications or Customers requirements, RDSO Specification and ISI 4984:2016


HDPE PLB Duct are designed and engineered to house the sensitive nerves of Information technology i.e. optical fibers thus enabling information transfer across the globe. Available as per Indian, International Standards or Customers requirements Most Suited for Pulling Optical Fibre Cable (OFC), Telecom, Electrical Lines etc.

 

Request
Callback
Yes! I am Interested

315 mm HDPE Pipes

315 mm HDPE Pipes
  • 315 mm HDPE Pipes
Ask For Price
Product Price :Get Latest Price

We are the Manufacturer, Distributor and Supplier of the best quality range of 315 mm OD HDPE Pipes. These products are available at an affordable and Best price. 

 

Use For:- Power Cables, Conduit Cable, TPDDL, Power Plant, Water Pipe, Drainage, Sewage

???

Range: Size- From 20 mm to 315 mm (Nominal Outside Dia.)

Variety - PN 2.5, PN 4, PN 6, PN 8, PN 10, PN 12.5 & PN 16.

 

 

JACK PIPES pipes are manufactured in according to various Indian & International standards such as IS 4984:1995, 4984:2016, ISO 4427, IS 14333, 14151. These are manufactured using advanced machinery & high-quality Raw materials from certified Vendors to manufacture the pipes which comply with international quality standards. With an installed production capacity of 10000 Kg Per Day for HDPE Pipes, we are committed to just in time supplying high-quality products to our customers.

 

 

 

Features and Specifications:

Manufactured from virgin pipe grade raw materials (PE 63, PE80, PE 100).

Excellent corrosion and chemical resistance. Inert to most acidic and

alkaline solutions.

High flow characteristics.

Light in Weight.

Easy to handle & transport.

Excellent flexibility combined with strength

Good abrasion resistance.

Smooth inner walls minimises frictional losses.

Safe for potable water supply.

 

 

Applications:

Process Water

Waste Water

Treated Water

Irrigation Sewer

Slurry Lines

Chemical Applications

Paper Mills

Sugar Mills

Breweries

Distilleries

Residential Colonies

Housing Societies

Farm Houses

Jal Boards Corporations

E.T.P.

W.T.P.

 

 

Other Details:

Brand:- Jack Pipes

Country of Origin:- Delhi, India

Material:- HDPE PE-100 / PE-80 / PE-63

Size & Pressure Rating:- 20 mm to 125 mm OD, 2.5 Kg/cm² to 16 Kg/cm²

Standards:- IS:4984, 14333,14151, DIN:8074/8075, ISO:4427

Request
Callback
Yes! I am Interested

HDPE Electrical Conduit Pipes

HDPE Electrical Conduit Pipes
  • HDPE Electrical Conduit Pipes
  • HDPE Electrical Conduit Pipes
Get Best Quote
Approx. Price: Rs 100 / MeterGet Latest Price

Product Details:

Size/Diameter1.5 inch
Length of Pipe18 m
MaterialHDPE
ColorBlack
Usage/ApplicationIrrigation
Country of OriginMade in India
Hollow SectionsSquare
Flow Rate2 (Litre Per Hour)

We are the Manufacturer, Distributor and Supplier of the best quality range of HDPE Electrical Conduit Pipe. These products are available at an affordable and Best price

 

 

Range: Size- From 20 mm to 315 mm (Nominal Outside Dia.)

Variety - PN 2.5, PN 4, PN 6, PN 8, PN 10, PN 12.5 & PN 16.

 

 

JACK PIPES pipes are manufactured in according to various Indian & International standards such as IS 4984:1995, 4984:2016, ISO 4427. These are manufactured using advanced machinery & high-quality Raw materials from certified Vendors to manufacture the pipes which comply with international quality standards. With an installed production capacity of 10000 Kg Per Day for HDPE Pipes, we are committed to just in time supplying high-quality products to our customers.

 

 

 

Features and Specifications:

Manufactured from virgin pipe grade raw materials (PE 63, PE80, PE 100).

Excellent corrosion and chemical resistance. Inert to most acidic and

alkaline solutions.

High flow characteristics.

Light in Weight.

Easy to handle & transport.

Excellent flexibility combined with strength

Good abrasion resistance.

Smooth inner walls minimises frictional losses.

Safe for potable water supply.

 

 

Applications:

Process Water

Waste Water

Treated Water

Irrigation Sewer

Slurry Lines

Chemical Applications

Paper Mills

Sugar Mills

Breweries

Distilleries

Residential Colonies

Housing Societies

Farm Houses

Jal Boards Corporations

E.T.P.

W.T.P.

 

 

Other Details:

Brand:- Jack Pipes

Country of Origin:- Delhi, India

Material:- HDPE PE-100 / PE-80 / PE-63

Size & Pressure Rating:- 20 mm to 125 mm OD, 2.5 Kg/cm² to 16 Kg/cm²

Standards:- IS:4984, 14333,14151, DIN:8074/8075, ISO:4427

Request
Callback
Yes! I am Interested
X

Explore More Product

View All Product


Reach Us
Zakir Khan (CEO)
Jack Pipes Industries
16-a, Hari Enclave, Kirari, West Delhi
New Delhi - 110086, Delhi, India


Call Us


Send E-mail